Digi’s digital expertise married with PMC’s monitoring technology results in a world-class studio monitor.

Features

• Professional, bi-amplified monitor
• Analog and digital inputs (up to 24-bit/96 kHz)
• Audiophile-grade, analog-controlled Class D amplifiers with high-quality linear power
• supply units
• Advanced Transmission Line technology provides high sound pressure level (SPL) and
• superior bass extension
• Unrivaled tonal accuracy, clarity, and dynamic range with exceptionally low distortion
• Powerful onboard DSP engine provides:
• Extremely accurate digital crossover for pristine imaging
• Bass Port Emulation mode to emulate tonal characteristics of ported bass
• reflex speakers
• Precise gain trim, low- and high-frequency adjustment, and speaker placement
• settings
• Low jitter analog-to-digital converter (ADC) with low-noise clock oscillator
• Sound dispersion design maintains accurate frequency response even in off-axis
• listening positions

The Digidesign RM2 is a professional, bi-amplified, near-field monitor speaker that offers incredible sound accuracy. The RM2 features a 6.7-inch low frequency driver, a smaller footprint than the competition that doesn’t compromise power or sound quality, and is ideal for recording studios, mixing suites, post-production facilities, broadcast installations, and other rooms that require a higher sound pressure level and even lower bass extension.

Co-developed with PMC (the Professional Monitor Company), the Digidesign Reference Monitor Series unites Digidesign’s deep expertise in digital audio with PMC’s legacy of fine, handcrafted, cutting-edge design and meticulous manufacturing. Together, Digidesign and PMC have created specially engineered monitors that employ PMC’s groundbreaking Advanced Transmission Line (ATLTM) technology and deliver unrivaled tonal accuracy, low distortion, accurate bass response, stunning clarity, and incredible dynamic range.

Because of ATL technology, the RM2 reference monitors can deliver higher volumes and lower bass extension than other speakers of similar sizes-even if identical or larger drivers are used. The frequency response also remains consistent regardless of how high or low listeners adjust the volume, meaning they won’t need to crank the monitors to achieve maximum bass response. The Digidesign RM2 is also designed for a wide sound dispersion, so listeners will get accurate frequency response even when they’re listening in an off-axis position.

General

• Frequency Response: 40 Hz – 25 kHz
• Peak SPL at 1 meter: 113 dB
• Effective Line Length: 4.9 feet (1.5 meters)
• Low Frequency Drive Unit: 6.7-inch (170 mm) doped cone with cast alloy chassis
• High Frequency Drive Unit: 1-inch (27 mm) fabric soft dome with ferrofluid cooling
• Crossover Frequency 3 kHz
• HF Adjustment -4 dB to +3 dB in 0.5 dB steps; corner frequency 1 kHz
• LF Adjustment: 4 dB to +3 dB in 0.5 dB steps; corner frequency 500 Hz

Input Connectors

• Analog: XLR Female-PIN 1 GND, PIN 2 +, PIN 3 -
• Digital (AES/EBU): XLR Female-PIN 1 GND, PIN 2 +, PIN 3 -
• Input Impedance: 22k Ohm

Sensitivity

• Input Level for Full-Scale Output: Adjustable from +4 dBu to +19 dBu
• Gain Trim: Nominal gain setting from 0 dB to -15 dB in 1 dB steps

Analog to Digital Specifications

• Maximum Input Level: 20.9 dBu
• Signal to Noise Ratio: 111 dB A-weighted
• THN + Noise: -95 dB
• Conversion Rate: 24-bit / 96 kHz

Digital to Analog Specifications

• Output Voltage: 6.37 VRMS
• Signal to Noise Ratio: 110 dB A-weighted
• THD + Noise: -95 dB

Power Amplifier

• Output Power LF: 100 Watts, HF: 50 Watts
• THD + Noise: 0.05%
• Signal to Noise Ratio: 125 dB
• Frequency Response DC: – 50 kHz

• Dimensions (H x W x D): 15.75 x 7.64 x 14.57 inches, (400 mm x 194 mm x 370 mm)
• Weight: 20 lbs (9 kg) per unit
• Finish: Dark grey texture

Powered by DataFeedFile.com

• DSP-controlled digital crossover and EQ > incredible tonal accuracy
• broad range of onboard digital EQ controls > customizable for your listening environment
• 8” anodized-aluminum cone LF driver > exceptionally low distortion
• 1” Teteron soft fabric Neodymium HF driver with built-in heat sink > accurate extension up to 27kHz with minimized power compression
• 180W Class D bi-amplification > low distortion, high efficiency
• analog and digital inputs > up to 24-bit/192kHz
• high-density cabinet > good damping and reduced acoustic interference
• custom bass-reflex dual-sided flared ports > controlled extended bass response with reduced turbulence

The Studiophile® DSM2 reference monitor is engineered to provide superior monitoring to discerning audio professionals. The design results from collaboration between two powerhouse companies in music technology: M-Audio, the top U.S. manufacturer of reference monitors, and Digidesign, the industry leader in DSP technology. The DSM2 monitor features DSP-based crossover management, an assortment of onboard digital EQ controls, proprietary high-grade driver designs, and analog and digital inputs for high-resolution audio up to 24-bit/192kHz. With stunning accuracy, clarity and dynamic range, the Studiophile DSM2 monitor makes world-class reference technology accessible to a broad array of creative and professional environments.

Features

• 1” (25.4 mm) Teteron soft fabric, high-frequency dome with Neodymium magnet and ferrofluid cooling—accurate to 27kHz
• 8” (203.2 mm) custom low-frequency driver with anodized aluminum cone provides exceptionally low distortion
• onboard DSP manages the complex digital crossover for pristine imaging
• DSP-based EQ and Acoustic Space Controls optimize frequency response for any production environment
• bass-reflex port delivers controlled extended bass response
• high-density cabinet yields good damping and reduced acoustic interference
• professional digital inputs (up to 24-bit/192kHz): S/PDIF and AES
• balanced analog inputs: XLR and 1/4”
• bi-amplified with Class D power amps: 100 watts (low frequency) and 80 watts (high-frequency)

Specifications

• frequency response: 42Hz-27kHz
• peak SPL at 1 meter: 111dB
• low-frequency driver: 8” (203.2 mm) domeless inverted anodized aluminum cone
• high-frequency driver: 1” (25.4 mm) soft Teteron dome with Neodymium magnet and ferrofluid cooling
• crossover frequency: 2.7kHz @ 24dB/octave
• HF shelf: +1.5dB, -1.5dB, -3.0dB
• mid EQ: +1.5dB, -1.5dB, -3.0dB
• high-pass filter: 40Hz, 60Hz, 80Hz, 100Hz @ 12dB/octave
• Acoustic Space Control filter: -1.5dB, -3.0dB, -4.5dB
• Desk EQ Filter 1: -1.0dB, -2.0dB, -3.0dB @ 220Hz
• Desk EQ Filter 2: -1.0dB, -2.0dB, -3.0dB @ 175Hz
• Desk EQ Filter 3: -1.0dB, -2.0dB, -3.0dB @ 200Hz
• analog inputs: XLR balanced and ¼” balanced
• digital inputs: S/PDIF and AES/EBU
• input impedance: 20k ohm
• input sensitivity: +4dBu yields 90dB @ 1 meter (trim level set to 0)
• gain trim: volume trim from -22dB to +10dB
• analog-to-digital specifications
• maximum input level: 18dBu
• signal-to-noise ratio: 102dB (A-weighted)
• THN + noise:
• conversion rate: 96kHz
• digital power amplifier
• output power (1% THD): LF: 100 watts, HF: 80 watts
• THD + noise (10 watts, 1kHz): < 0.05%
• signal-to-noise ratio: 100dB (A-weighted)
• frequency response (+0, -3dB): 20Hz-40kHz
• efficiency: > 90%
• dimensions: 15.2” (385 mm) x 10.6” (270.3 mm) x 10.1” (257.5 mm)
• weight: 20 lbs. (9.1 kg)

Profesional Studio Monitors

M-Audio’s experienced engineers combine innovative thinking with masterful speaker design and superior craftsmanship, developing monitors that push technology boundaries and outperform the competition. From the high-resolution Studiophile DSM series to the best-selling BX Deluxe series, M-Audio provides the perfect monitoring solution to complement your professional setup, project studio or mobile recording rig.

• DSP-controlled digital crossover and EQ > incredible tonal accuracy
• 6.5” anodized-aluminum cone LF driver > exceptionally low distortion
• broad range of onboard digital EQ controls > customizable for your listening environment
• 1” Teteron soft fabric Neodymium HF driver with built-in heat sink > accurate extension up to 27kHz with minimized power compression
• 180W Class D bi-amplification > low distortion, high efficiency
• analog and digital inputs > up to 24-bit/192kHz
• high-density cabinet > good damping and reduced acoustic interference
• custom bass-reflex dual-sided flared ports > controlled extended bass response with reduced turbulence.

The Studiophile® DSM1 reference monitor is engineered to provide superior monitoring to discerning audio professionals. The DSM1 monitor features DSP-based crossover management, an assortment of onboard digital EQ controls, proprietary high-grade driver designs, and analog and digital inputs for high-resolution audio up to 24-bit/192kHz. With stunning accuracy, clarity and dynamic range, the Studiophile DSM1 monitor makes world-class reference technology accessible to a broad array of creative and professional environments.

Features

• 1” (25.4 mm) Teteron soft fabric, high-frequency dome with Neodymium magnet and ferrofluid cooling—accurate to 27kHz
• 6.5” (165.1 mm) custom low-frequency driver with anodized aluminum cone provides exceptionally low distortion
• onboard DSP manages the complex digital crossover for pristine imaging
• DSP-based EQ and Acoustic Space Controls optimize frequency response for any production environment
• bass-reflex port delivers controlled extended bass response
• high-density cabinet yields good damping and reduced acoustic interference
• professional digital inputs (up to 24-bit/192kHz): S/PDIF and AES
• balanced analog inputs: XLR and 1/4”
• bi-amplified with Class D power amps: 100 watts (low frequency) and 80 watts (high-frequency)

Specifications

• frequency response: 49Hz-27kHz
• peak SPL at 1 meter: 110dB
• low-frequency driver: 6.5” (165.1 mm) domeless anodized aluminum cone
• high-frequency driver: 1” (25.4 mm) soft Teteron dome with Neodymium magnet and ferrofluid cooling
• crossover frequency: 2.7kHz @ 24dB/octave
• HF shelf: +1.5dB, -1.5dB, -3.0dB
• mid EQ: +1.5dB, -1.5dB, -3.0dB
• high-pass filter: 40Hz, 60Hz, 80Hz, 100Hz @ 12dB/octave
• Acoustic Space Control filter: -1.5dB, -3.0dB, -4.5dB
• Desk EQ Filter 1: -1.0dB, -2.0dB, -3.0dB @ 220Hz
• Desk EQ Filter 2: -1.0dB, -2.0dB, -3.0dB @ 175Hz
• Desk EQ Filter 3: -1.0dB, -2.0dB, -3.0dB @ 200Hz
• analog inputs: XLR balanced and ¼” balanced
• digital inputs: S/PDIF and AES/EBU
• input impedance: 20k ohm
• input sensitivity: +4dBu yields 90dB @ 1 meter (trim level set to 0)
• gain trim: volume trim from -22dB to +10dB

A Great Active Monitor for Pros and Desktop Producers Alike!

The M-Audio Studiophile DSM1 active reference monitor gives you accuracy, rich, natural sound, and onboard DSP for great results – even from your desktop! The Studiophile DSM1 includes both analog and digital inputs (24-bit/192kHz), allowing you to optimize it for practically any studio environment, from pro console to “in-the-box” DAW. Its 6.5″ LF driver and 1″ HF driver receive a total of 180 watts of power from integrated Class D amplifiers. Onboard DSP not only controls the crossover, but provides extensive phase-correction and EQ functions inside the Studiophile DSM1.